Library cupboards

One of the designers that I regularly admire items from on Thingiverse is Ecaroth.  I decided to try printing the sample items from his library set to see if would be worth purchasing the entire pack.

Cupboards in the corner.

The sample includes 3 cupboards, one of which is a corner unit.  I painted them with a burnt umber base coat and a heavy drybrush of burnt sienna to give a richer, warmer tone than my existing dungeon furniture.

Cupboards separated.

To save on resin, I hollowed the cupboards leaving a 2mm shell.  I punched holes in the back and base to assist with the resin drainage during printing.

Printed hollow with plenty of drainage holes.

They match well in size with my Mantic Terrain Crate scenery, so I could easily print some more and paint them to match those.  By mirroring each design, you could have a total of six different cupboards.

Comparison to Mantic Terraincrate shelves.

In summary, I think these cupboards have turned out great and I will certainly be purchasing the full set from Hero's Hoard in due course.  They'll be a great addition to my Hirst Arts Heroquest dungon.

Dungeon library - Mantic terraincrate review

One thing that my Hirst Arts dungeon has been lacking is a decent library.  All evil wizards need a good supply of magic spell books, gazetteers, atlases, arcane manuscripts etc.  I've been thinking about constructing one for years but haven't had a chance to sit down and do all the cutting out of balsa for the bookcases, cardboard for the books etc.  Fortunately Mantic Games have come to my aid with their Terrain Crate library, a set of which I recently picked up along with their torture chamber furniture, both for about half price.

Painted above, from the box below.

The bookcases are a hard plastic and come pre-assembled and pre-painted in a dark brown.  Mould lines are minimal but they still benefit from a quick clean up with a razor blade or very sharp craft knife.  I gave mine a good scrub with warm water and washing up liquid before painting in my usual "dungeon wood" colour scheme.

A small library.

The set include 2 complete sets of bookcases (3 wide, 1 narrow, 1 corner), a desk, pile of books and a ladder.  The torture set includes 2 complete sets of an iron maiden, trolley of equipment, rack, table, coffin, sarcophagus and skeletal remains.

Book cases and desk.

The bookcases have nice chunky detail that takes drybrushing well.  Although I repainted them completely, a quick brush of light brown would be sufficient if you wanted a fast, easy improvement.

Torture equipment and cupboard

Some of the torture equipment is a little fiddly and needs to stand in hot water to straighten out slightly warped legs etc.

Ready for the next victim!

Detail is excellent, especially on some of the torture equipment.

A few ominous stains on that wood...

Due to the moulding process, there isn't much recessed detail, eg under manacles and chains, but it's probably tougher than resin would be and lighter and cheaper than metal.

Cupboard and shelves.

Bookcase.

The books are varied in size.  Although they don't have any spine detail, it's easy to add some with a dab of gold paint.

More bookcases.

I'd give the library set a B+ (good detail, comes ready-assembled and painted but quite chunky and a few mould lines to clean up) and the torture chamber set a B- (also excellent detail but mould lines again and also some warped legs on the rack, turture table etc.)