Badger reinforcements

 I've acquired a few more Badgers recently, one from a local model railway shop's old toy box, the other two (without radar antennae) from e-bay.  I think a couple of Peter Pig Hummer MG mounts will finish those two nicely, similar to the couple of Stoats I want to add them to.

Before and after (or so I hope...)

Replacement Badgers from the surplus depot.

Hmm... looks like this one hit a mine!

Disassembled and ready for refurbishment.

Mould lines filed and sanded (paint still to be scrubbed).

Scrubbed sanded and filed, ready for painting.

 

Armoured Transport part 3

With 5 personnel carrier bodies to play with, I decided to upgrade one with a weapons turret.  I bought a small plastic Gepard SPAA tank a while ago, the Leopard tank body was rubbish but the turret had possibilities.  Sadly I couldn't find it, but luckily I had a couple of old Airfix CVR(T) Scorpion tank kits handy, so I decided to go with one of them.

Fire support vehicle.

The turret has been built in the Scimitar configuration with a 30mm RARDEN cannon. I've added a few extras in the form of corrugated plasticard, a bit more treadplate, a map pin sensor sphere, the end of an MG34 mounted coaxially with the main gun, a couple of Italeri jerry cans and the missile pod from a Mechwarrior clicky tank.

Rear detail.

 The APC body has a fire extinguisher added next to the forward stowage area and a small hatch nearby.  I imagine this hatch is for munitions loading.  The turret is slightly offset to one side to prevent the missile pod protruding over the side of the vehicle.  With a hole drilled through two layers of 1.5mm plasticard, the turret fits snugly in place and doesn't wobble as you turn it.  After completing the turret, I discovered that the slight overhang of the jerry cans on the back of the turret bustle/stowage bin was going to leave them too close to the top of the hull, they'd end up rubbing a line in the paint.  An extra circle of 1mm plasticard has lifted the turret enough to avoid this problem.

APC top plate mounting.

 I've found that Mechwarrior clicky vehicles are an excellent source of missile pods and the like and are still fairly easy to get hold of on e-bay.  You can see the missile pod donor on the right here.  As well as the tanks seen here, I have a the Jes II missile carrier which comes with loads of missile pods - some will be finding their way into my forces very soon.

Weapon donors.

Armoured Transport part 2

With the rivets drilled out, the body shells are all ready for the next stage of their treatment...

Body shells separated and ready for cleaning.

A steel file takes care of any obtrusive mould lines and a quick once-over with fine grit wet & dry paper finished them off.  I took particular care to ensure the top edges of the troop compartment were free of paint and had a good key for gluing.  After this they get a good rub-down all over using a brillo pad (ie. steel wool), then a scrub with an old toothbrush and some washing up liquid to give a good surface onto which I can glue/paint.

After filing, sanding and steel wool

 I've used 1.5mm thick plasticard for the roof of the troop compartments.  I held this in place, flipped each one over and ran a bead of superglue along the inside.  The glue gets drawn into the join by capillary action and I don't end up with any unsightly blobs on the outside.

Basic plastic rectangles trimmed to size

I'm using all sorts of bits for this project.  Behold my construction table - A2 cutting mat, a couple of craft knives, razor blade, heavy duty 60cm aluminium ruler, an assortment of 1mm and 0.5mm brass rod plus several different sizes of brass tube, plasticard, square section plastic rod (in various sizes), polycement, wet and dry paper, toothbrush, assorted plastic angle sections (H-beams, I-beams, T-section and L-section), a couple of plastic boxes containing jerry cans and general stowage.

An assortment of the stuff I use.

 My APCs will need some sort of top hatch, I've fashioned these out of 0.5mm plasticard apart from the one at the back which has 1.5mm - but more on that later...

The APCs take shape...

Now is the time to experiment.  I thought that some of my various vents and grilles from The Scene's building accessory range might be useful.

Trying a couple of The Scene's vents.

He also makes nice hatches and chunky air conditioning / extractor fan units.

More from The Scene - vent, hatch and A/C unit

Hmm... let's see just how much stuff we can add...

OTT stowage and bits.

This now has the following: The Scene hatch, vent and A/C unit, Continental Model Supply Company stowage bundles and modern UK ammunition boxes (7.62mm and 120mm), Italeri jerry cans, Airfix M2 Browning (in CMSC gun mount).

OTT stowage and bits rear view.

I know it looked good but I haven't got enough spare parts to do all my APCs!  So it's on to something simpler.  I've used some treadplate in what seems like a logical place where someone will be clambering out of the top hatch.

Some more details added.

 T-section girders form the edges of a stowage area in the middle, L-section girder hides the join between the plasticard and the back of the cab.  Brass rod will be the hinges for the top hatch.

The hatches now have hinges.

 I found a couple of old metal backpacks in my bits box.  I don't know where they came from but they'll make some nice extras for a couple of the vehicles.

Some backpacks as extra stowage.

Finished!  Jerry can added in the stowage area (actually, I think I might need to add a rectangle of thick plasticard too, to serve as a first aid kit).  I've engraved a line to separate the doors of the top hatch and added handles.  There are vision blocks made from 1mm square plastic rod added around the edge of the roof.

Finished (until I think of something else to add...)

Here they are in formation. More on the turreted one at the far end next time!

Ready for painting.

More Stoats

More Stoats...

It looks like my post about the Stoat scout car was quite popular.  My e-bay lot containing the Weasels armoured car also includes 3 more Stoats for me to convert.  I'm thinking that Peter Pig Hummer weapons mounts might be a nice addition to a couple of them, replacing the little man with binoculars.

Weasel Armoured car

Weasel Armoured Car

Another old Matchbox vehicle to convert - came as part of a job lot of Matchbox military stuff from e-bay.  I have another one in my old toybox at my Mum and Dad's, I'll have to dig it out next ime I'm there.

I'm thinking that this one will be painted to match my personnel carriers.  Now all I need to do is work out what that colour scheme is going to be...

Diceni Games Day

Sunday dawned bright and sunny, this last week has been pretty good although still an icy wind.  Still, it was a balmy 6 Celsius so I could wear my Old Buckenham Bone Crushers t-shirt.  Visitors arriving at The Forum in Norwich first encountered a small selection of military vehicles.  The Forum houses the Millennium Library, BBC offices, Pizza Express and various others, I think it's one of the best millennium projects I've come across and I'm glad it's been a huge success.  There are often events taking place in the large central atrium.  Most of the photographs are pretty large - click on any of them to see more detail!

The Forum

A Spartan and a Star Fleet security officer were there to greet people as they arrived.

Main entrance

  I confused my friend Graham when I asked if he'd seen the Spartan - he was thinking of the battle of Thermopylae rather than Halo!

Spartan

 I think the Starfleet officer was probably from Voyager?

Starfleet

There was a nice CVR(T), either a Scimitar or a Sabre (I couldn't see the turret shape under all that camo netting), and Boudicca herself was there too.

Boudicca and CVR(T) Sabre

I bet she wishes she had light tanks instead of a rubber spear when she fought the Romans.

Boudicca

There were several demonstration games.  Dystopian Wars is something we've played at the club a few times.

Dystopian Wars

 Bearing in mind the title of the event it seemed fitting that there was a battle between Boudicca and her Iceni tribesmen against the Romans.

Boudicca and her Iceni take on the Romans

Saga appeared to be a dark ages battle.  I liked the teddy-bear fur thatch on the cottages!

Dark age battles in Saga

US and German troops clash

US and German troops.

 

English Civil War

There were a range of other costumed Dr Who fans...

Weeping Angel

Do-nate!  Do-nate!

Power Ranger, small assistant, Amy Pond and Ace

Diceni Games Day 7th April 2013

I'll be going to the Diceni Games Day in Norwich next Sunday.

http://www.diceni.co.uk/

The event opens at 10:00am (a piece of information strangely absent from their web site!) and should be a great day, a range of traders and demo games going on.

Be sure to pop in if you're in the area!