This will be a fast food takeaway with entrance and exit doors. |
I've smoothed over the interlocking cut corners with filler. Rather than use water, I've used paints to mix up the filler, this seems to give a better texture for application and sands to a good finish. I've used Wilko emulsion tester pots which I've found to give excellent coverage. Each building received a couple of coats of white MDF sealant, then a very gentle sand with a fine grade foam sanding block. After wiping off the sanding dust (I just use a big, soft brush) I've followed this with a couple of coats of my chosen colour, again sanding between coats. This gives a nice smooth finish and helps conceal any grainy or fibrous texture from the MDF.
There are a number of other web sites out there with nice examples of painted buildings from MMG, my two favourite so far are Marja's Miniature Adventures and Dropship Horizon.
Here are a few of the storage containers I got in the same order. These are fantastic value, just what I need for filling up table space with large objects to provide cover. I've assembled some with the doors open, these can act as objectives for certain scenarios.
These look great
ReplyDeleteI too have received a substantial order from Mad Mecha fairly recently, and I love the buildings. I have to confess that I don't have the patience to tidy them up as well as you Paul, but I thoroughly endorse them! Thanks for the tip about the tester pots by the way!
ReplyDeleteI like the look of those storage containers. I was planning to get some at some point but I think you have just bumped them up the queue a bit.
ReplyDelete